Overview
Ortlieb Sport Packer Plus Panniers are great for both front and rear racks. These versatile bags can be used for everyday shopping or to carry added cargo on a long tour.The Sport Packers are equipped with the QL2.1 mounting system for easy, tool-free adjustments, and are compatible with most racks. The flip-top, splash-proof lid has compression straps and D-rings for a safe seal to ensure your cargo stays dry.
Couple these panniers with the Bike Packer Plus for a great tour combo. These bags will go anywhere you do.
QL2.1 System: This system is similar to the QL2 in many ways but differs slightly in a few areas. The upper rail has been slightly changed, rather than having 3 independent parts the rail is 1 piece for additional strength. The reduction inserts no longer attach from the mouth of the top hook but rather from the side, and they are available in 8mm, 10mm 12mm and 16mm. The lower anchor doesn’t have the elliptical rail but rather a slightly padded horizontal rail which does a nice job of protecting the finish on the vertical stays on the rack.
Features
- QL2.1 Mounting System
- Features of both Upper & Lower Mounting
- Manufactured from a fiber-reinforced high-tech, anti-scratch thermoplastic that is extremely strong and durable, and in many tests can be stronger than metal parts.
- Fits rack rails from 8mm to 16mm diameter.
- See the QL2.1 mounting instructions.
- Upper Mounting
- The hook positions are easily adjusted without tools for optimal placement on the rack’s upper rails.
- More forward placement is better for weight distribution, but rearward positions may be necessary for heal clearance.
- Quick-lock hooks open automatically by lifting the pannier handles for easy one-handed removal.
- Includes anti-scratch hook inserts for 8mm, 10mm and 12mm rails.
- Optional 20mm QL-2.1 Top-Hooks – E193 are available for over-sized rack top-rails.
- The hook positions are easily adjusted without tools for optimal placement on the rack’s upper rails.
- Lower Mounting
- The semi-elliptical shape of the lower hook rail allows for optimal positioning for secure and easy attachment.
- The lower hook position along the rail and orientation (in 15 deg steps) is easily adjusted without tools.
- An additional lower mounting hook can be added on for extra security of the panniers in rough conditions.
- Features of both Upper & Lower Mounting
- “Plus” – Cordura, PU Coated – PS36C
- Highly rated tear and abrasion resistance.
- Use of high frequency welding to meet the highest of waterproofing specifications.
- As compared to the “Classic” PD620 fabric, it is lighter in weight and more flexible especially in cold weather, yet it is still very tough.
- Not as easy to clean as the “Classic” PD620 fabric.
- Highly durable, polyurethane waterproof inner layer.
- Lids Over Gasket W/Drawstring
- Waterproof lid closes over the gasket and is sealed by tightening the vertical compression straps.
- The roll closure gains it’s stability and waterproof quality from the thin plastic stiffener bars sewn into the upper end of the material.
- The closure system offers quick access to your gear with the release of two buckles and the opening of the drawstring.
- Dust & Water Proofness Rating: IP 54
- 5 = Protected against dust, slight penetration of dust possible.
- 4 = Protected against splash water coming from all directions.
- Includes two shoulder straps for carrying the panniers off of the bicycle.
- Highly reflective 3M Scotchlite patches on front and rear of pannier.
- Internal storage pocket.
- Lower edge protector with slots for mounting to the Ortlieb Carry System.
- Typically used as front panniers but can also be used as small rear panniers.
- Compare the primary feature sets across all Ortlieb Bags on our Ortlieb Feature Page
Specs
- Sold as a Single. Also available as Pairs and with Add-On Deals.
- H x W x D (single): 40cm x 25cm x 14cm / 15″ x 9″ x 5″
- Weight (single): 840g / 29.7oz
- Volume Capacity (single): 15L / 915 cu.in.
Warranty
Ortlieb Warranty Details:
All Ortlieb Bags are backed by a 5-year warranty against defects in material and manufacturing.
Please see our Warranty page for the details of our warranty process.