Overview
When you need the cargo capacity that a rack provides, but need something that won’t get in your way when the going gets rowdy, Nano Panniers are the ticket.
At only 4″ wide the load stays tight to the bike on singletrack and will not get in your way on those nasty hike-a-bikes. An external compression system keeps the bag snug at various load levels. The devil is in the details on our rack attachment system. Although simple in concept, the tight spacing between the aluminum loop and strap prevents slop at the pannier rails. A bomber Voile nano strap with metal hardware provides tension at the bottom and gives versatility in mounting.
Fiberglass stiffened high density foam frame sheet gives the bag internal structure and works with the external compression system to transfer load to the rack.Made with 200 denier UHMWPE / Polyester woven laminated fabric, the Nanos have a minimum of seams for durability and water resistance, plus double taped lower seams.
Think of these bags as frame bag supplements that stay on your bike; designed to carry dense and heavy stuff like food, water, and fuel with a low profile form. With a bikepacking mindset you still put your bulky, high water sensitive items like clothing, sleeping and shelter gear in a waterproof handle bar setup, seat pack, or on top of the rack deck.
*Note: These panniers are not compatible with “T” style racks. They lack the load capacity and means for a lower attachment.
Features
- Full Challenge Sailcloth 200 denier UHMWPE / Polyester woven laminated fabric
- Super tough rattle free mounting with metal hardware. Speciality high cycle life (10,000+ cycles) hook and loop straps
- Fiberglass internal and exterior stiffiners
- High density closed cell foam frame sheet
- Made in the USA with domestic and imported materials
- Please note: These panniers are made with a minimum of seams but are not fully waterproof.
Specs
- Weight (Pair): 18 oz / 510 gm
- Volume: 7-11 L Each side 420-680 cubic inches each side
- Materials: Challenge Sailcloth 200 denier UHMWPE / Polyester woven with PET film lamination
Warranty
All Revelate Designs Bags are backed by warranty against defects in material and manufacturing.
Revelate Designs warranty policy (we apply these same standards):
Revelate bags are made from high quality materials and will stand up to the use for which they are designed. In standing by this guarantee, Revelate Designs provides a warranty to the original owner on all products purchased through authorized sources against defects in materials and workmanship. If any issue arises regarding materials or workmanship please contact us (Revelate Designs) via email for evaluation and return instructions. If an item is found to be under warranty we(Revelate Designs) will repair or replace at our discretion, free of charge. We (Revelate Designs) require a dated proof of purchase.
What the Revelate Designs warranty doesn’t cover: damages involving zipper wear, general wear and tear, improper use & improper mounting (seat bag damage due to tire hits or tire-rub holes, handlebar damage), alterations made by owner, damages due to accident or caused by uses other than intended. Bikepacking gear is intended for off road use and ultimate adventures. Constant use or heavy intermittent use will cause your bags to develop character. If your bag needs extra love, we (Revelate Designs) will do our best to repair it at a reasonable cost (labor & materials) and put it back in service.
All items sent for repair assessment must be clean. Bags should be hand wash and hang dried (washer/dryer agitation can cause additional damage). Soiled bags will not be assessed and will be returned for cleaning.
Please see our Warranty page for the details of our warranty process.
